翻訳と辞書
Words near each other
・ ITU Triathlon Mixed Relay World Championships
・ ITU Triathlon World Cup
・ ITU TRIGA Mark-II Training and Research Reactor
・ ITU Turkish Music State Conservatory
・ ITU TV
・ ITU V.23
・ ITU V.70
・ ITU World Triathlon Series
・ ITU Youth Forum
・ Itu'muta
・ Itu'ti'u
・ Itu, Nigeria
・ Itu, São Paulo
・ ITU-D
・ ITU-R
ITU-R 468 noise weighting
・ ITU-R BT.656
・ ITU-R P.525
・ ITU-T
・ ITU-T Y.1564
・ Ituango
・ Ituango Dam
・ Ituano FC
・ Ituata District
・ Ituaçu
・ Itubaína
・ Ituberá
・ Itubu Imbem
・ Itubwa Amram
・ ITUC-Asia Pacific


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

ITU-R 468 noise weighting : ウィキペディア英語版
ITU-R 468 noise weighting

ITU-R 468 (originally defined in CCIR recommendation 468-4; sometimes referred to as CCIR-1k) is a standard relating to noise measurement, widely used when measuring noise in audio systems. The standard,〔http://www.itu.int/dms_pubrec/itu-r/rec/bs/R-REC-BS.468-4-198607-I!!PDF-E.pdf〕 now referred to as ITU-R BS.468-4, defines a weighting filter curve, together with a quasi-peak rectifier having special characteristics as defined by specified tone-burst tests. It is currently maintained by the International Telecommunications Union who took it over from the CCIR.
It is used especially in the UK, Europe, and former countries of the British Empire such as Australia and South Africa. It is less well known in the USA where A-weighting has always been used.
== Explanation ==
While most audio engineers are familiar with the A-weighting curve, which was based on the 40 phon equal-loudness contour derived initially by Fletcher and Munson (1933) the later CCIR-468 weighting curve, now supported as an ITU standard is less well known outside of the UK and Europe. Originally incorporated into an ANSI standard for sound level meters, A-weighting was intended for measurement of the audibility of sounds by themselves. It was never specifically intended for the measurement of the more random (near-white or pink) noise in electronic equipment, though has been used for this purpose by most microphone manufacturers since the 1970s. The human ear responds quite differently to clicks and bursts of random noise, and it is this difference that gave rise to the 468-weighting, which together with quasi-peak measurement (rather than the rms measurement used with A-weighting) became widely used by broadcasters throughout Britain, Europe, and former British Commonwealth countries, where engineers were heavily influenced by BBC test methods. Telephone companies worldwide have also used methods similar to 468 weighting with quasi-peak measurement to describe objectionable interference induced in one telephone circuit by switching transients in another.

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「ITU-R 468 noise weighting」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.